1. Front USB Connectors

There are 2 sets of front USB connectors in TRIO case. Please see the picture at
the left.

To install the TRIO front USB ports, please follow your motherboard guide.

NOTE ... Please make sure that all the connectors are installed correctly according to your motherboard guide, or you might damage the front USB and other function.

 

2. Front IEEE 1394 Connector

There is one front IEEE 1394 connector in TRIO case. Please see the picture at the left.

Please follow your motherboard guide to install the TRIO front IEEE 1394 port properly.

   

3. Audio / Microphone Connectors

There is one set (4 pins) of Audio / Microphone connector in TRIO case. Please see the picture as follows. You need to install these connectors properly to use the front Audio / Microphone jacks and the sound pressure measurement function. The TRIO case meter circuit will measure the level of sound pressure from both the right and left channel, and show the average number of L/R channel on the meter.

Please follow your motherboard guide to install the Audio / Microphone connectors to your motherboard properly.

   
4. Meter Power Connector

Please plug in the following connector to start the TRIO meter.
   
5. Fan Control Connector

Please plug in the following connector to the specific fan that you want to adjust
its speed.
   
6. Temperature Sensor

Please firm up the following temperature sensor to where you want to measure
the temperature.