1.Turn off your PC.

2.Pass the LED wire through the holes on the fan and put the LEDs in the screws as the picture below.

3.Fix your fan on your case or CPU cooler with the screws.

4.Plug the 2-pin connectors of the LED wire to the wire harness of the power wire with the red line on the printed side of the power wire as the picture below.

5.Plug the molex connector to your power supply.

6.Turn on your PC and enjoy the new look of your device!!

 
 
 
       
  Dimention     W 11mm x L 2 5mm x Thread O 4.8x1.5x15     Content     - LED with wire x 4 ( +: red, - : black )
- Screws x 4
- Power wire x 1 ( 1 male molex,
1 female molex and a 8-pin wire harness
for the LED wire )

     
Cable Length 700mm ( Total )
   
Voltage 12V
   



 


Current 6.7mA
   
Power 0.33W
   
   
   
 
- Superbright O3 LED